斯威溫渦輪機

D400 RED PNP 3S

$169.90
Sold out
was $219.90 Save 23%
KIT ONLY
Product Details
Wingspan 1120mm (44.1in)
Length 1042mm (41.1in)
Flying Weight 1200g (42.33 oz)
Cruising speed about 80 km/h
Flying time about 5 mins
Wing area 32.24 dm 2
Wing load 37.22 g/dm 2
Main material 52 times EPO
Painting surface matte paint
Suitable experience level □Zero basis □Beginner ■Intermediate □Advanced
PNP Assembly difficulty □☆10mins ■★☆30mins □★★60mins
Suitable for ambient temperature 0℃~40℃
Radio System 4 channel (required & not included)
Motor 3536 / KV1300 brushless
ESC

40A / 2S~4S(Standard XT60 Plug)

Propeller 11×5.5 2 blade
Servos

12g×4 PCS (Metal gear digital servo)

Recommended Battery 3S,11.1V,2200mAh,LiPo with XT60 type plug(required & not included)
Ailerons Yes
Winglets Yes
Elevator(Horizontal tail) Yes
Rudder(Vertical tail) Yes
General landing gear control system No
LED lights system No
Electromagnetic brake system No
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box(Card mark)/114.5×40.5×28(cm)
CG (Center of Gravity) 110~115mm from the leading edge of the Main Wing
Landing Gears

Rear three-point fixed landing gear

Battery Charger LiPo battery charger (required & not included)



PACKAGE INCLUDES:

  • Fuselage ×1
  • Left Wing ×1
  • Right Wing ×1
  • Left Horizontal Stabilizer ×1
  • Right Horizontal Stabilizer ×1
  • Winglets ×2
  • Main wing carbon tube L=410mm external diameter 16mm×1
  • Horizontal Stabilizer tube L=405mm external diameter 6mm×1
  • Front landing gear ×1
  • Accessories Bag 1 ×1
    • Control rod (SUS304Ф1.5 × 90mm) ×1
    • Screw (PM3 × 10mm) ×4 (Front landing gear)
    • Screw (PA2 × 6mm) ×2 (Front landing gear fixing plate)
    • Screw (PA3 × 15mm) ×4 (Winglets)
  • Manual ×1

REQUIRES:
  • 4 channel radio system(radio & receiver) (required & not included)
  • 3S,11.1V,2200mAh,LiPo with XT60 type plug(required & not included)
  • LiPo battery charger (required & not included)
Share this product with your friends
D400 RED PNP 3S
Share by: