斯威溫渦輪機

HSDJETS HF-86 Foam Turbine Yellow Ribbon Colors PNP

$1,550.00
Sold out
Product Details

SPECIFICATIONS:


Wingspan 1720 mm (67.7 in)
Length 1715 mm (67.5 in)
Flying Weight 10.5kg (23.1 lb)with 1800cc Aviation kerosene
Configuration of turbine engine 7KG~10KG (required & not included)
Cruising speed 160~180 km/h
Flying time 6~8 mins (full throttle)
Wing area 64.34 dm 2
Wing load 163.2 g/dm 2
Main material 20 times EPO
Painting surface Matte environmental water-borne paint + decal
Suitable experience level Intermediate
PNP Assembly difficulty □☆10mins ■★☆30mins □★★60mins
Suitable for ambient temperature 0℃~40℃
Radio System 8 channel (required & not included)
Control System MFC-2085
Servos

7.4V 25g×2 Metal gear with 560mm lead (Left & right ailerons forward)
7.4V 25g×2 Metal gear with 410mm lead (Flap×2 forward)
7.4V 25g×3 Metal gear with 190mm lead (Elevator×2 & rudder×1 forward)
7.4V 25g×1 Metal gear with 230mm lead with protection function (Front wheel cover plate forward)
7.4V 12g×3 Metal gear with 380mm lead with protection function (Front wheel steering / Rear wheel cover plate forward)
7.4V 12g×2 Metal gear with 80mm lead with protection function (Speed brake forward)

Recommended Battery 2S,7.4V,2200~5200mAh ×2 ,LiPo with XT60 type plug(required & not included)
Ailerons Yes
Flaps Yes
Elevator(Horizontal tail) Yes
Rudder(Vertical tail) Yes
The smoke system No
LED lights system Yes
Electromagnetic brake system Yes
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box(Card mark)/52×21.7×17.3(inch)
CG (Center of Gravity) 300 305 mm from the leading edge of the Main Wing
Landing Gears Metal electric retractable hydraulic landing gear×3
Battery Charger LiPo battery charger (required & not included)
PACKAGE INCLUDES:
  • Fuselage ×1 pcs
  • Left main wing ×1 pcs
  • Right main wing ×1 pcs
  • Nose ×1 pcs
  • Cockpit ×1 pcs
  • Vertical tail ×1 pcs
  • Horizontal tail ×1 pcs
  • Left auxiliary tank ×1 pcs
  • Right auxiliary tank ×1 pcs
  • Main wing carbon tube L=598mm external diameter 16mm×1 pcs
  • Accessories Bag 1 ×1 pcs
    • Screw (HA4 × 45mm) ×4 pcs (Horizontal tail)
    • Screw (HM4 × 20mm) ×4 pcs (Wing)
    • Screw (HM4 × 16mm) ×4 pcs (Wing)
    • Screw (HA3 × 10mm) ×16 pcs (Vertical tail / Nose)
    • Screw (HA3 × 14mm) ×8 pcs (Engine)
    • Screw (HM4 × 60mm) ×4 pcs (Nose)
    • Screw (HM4 × 70mm) ×8 pcs (Auxiliary tank)
  • Accessories Bag 2 ×1 pcs
    • 100mm signal line(JR male+JR male) ×8 pcs
  • Manual ×1 pcs

REQUIRES:
  • 7KG~10KG turbine engine (required & not included)
  • 8 channel radio system(radio & receiver) (required & not included)
  • 2S,7.4V,2200~5200mAh ×2 ,LiPo with XT60 type plug (required & not included)
  • LiPo battery charger (required & not included)
Share this product with your friends
HSDJETS HF-86 Foam Turbine Yellow Ribbon Colors PNP
Share by: